New Fluke 125
Connect and View™ triggering for
an instant, stable display
Scope users know how difficult triggering
can be. Incorrect settings show unstable
and sometimes incorrect results.
The unique Connect-and-View function
recognizes signal patterns and
automatically sets up correct triggering.
It provides a stable, reliable and repeatable
display of virtually any signal, including
motor drive and control signals, without
touching a button. Signal changes are
instantly recognized and settings
adjusted for a stable display. Benefit
from the speed and convenience when
measuring a number of test-points in
quick succession.
Battery powered mobility
Up to seven hours of battery operation
frees you from mains outlets for true
on-the-move working. The handheld
format and the weight of just 1.2 kg
make the instrument easy to carry and to
fit comfortably in your hand. The rugged
and drip proof case assures long life and
reliable operation in the harshest
industrial environments.
Connect-and-View captures even the most
complex motor drive signals.
Check the starting capacitor of a motor with
the ScopeMeter 120 Series.
Bus Health mode allows for an
analysis of the signal quality on
industrial network, comparing
measured signals to the
standards’ signal requirements.
Fluke 125 is the
ScopeMeter of choice
for the maintenance
engineer who deals with
industrial machinery and
the industrial network
connecting his machinery
the like.
The Fluke 125 has all the
functionality of the 124 plus
it comes with the following
extensions:
•
Bus Health mode gives a clear
“Good” / “Bad” indication for the
electrical signals on industrial buses
and networks, such as CAN-bus,
Profi-bus, RS-232 and many more.
The Fluke 125 validates the quality of
the electrical signals as soon as any
electrical signals are passed along
the network. It checks the signal
levels and speed, transition times and
distortion, and compares these to the
appropriate standards to help you find
errors like improper cable connections
and terminators. It helps you find the
source of error in case communication
comes to a halt. All the commonly
found industrial network types are
supported!
•
Power Measurements for single phase
and balanced 3-phase systems. The
Fluke 125 can directly present you the
Total Power (Watts), Apparent Power
(VA), Reactive Power (VAR) and the
Power Factor (PF), over a wide range
of applied frequencies, including those
seen with motor drives and inverters.
As a result, you are able to easily
see the effects on the various power
measurements during start-up or
under changing operational conditions.
A current clamp is included as a
standard.
•
Harmonics mode graphically displays
harmonics up to the 33rd harmonic to
assist in fault-finding, e.g. with large
non-linear loads.
•
RPM and Hz reading for use with
electrical and combustion engines.
•
Vac pwm for use on motor drive
outputs, reading the true output voltage
experienced by the motor itself.
•
Low impedance measurements
giving a 0.01 ohms resolution for motor
windings and the like.
See the Technical Datasheet for more
details on the Fluke 125.
(12 pages)
(9 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals